Carter Products 50009303 1/2-Inch-by-93-1/2-Inch AccuRight Bandsaw Blade

My INITIAL review of this band saw blade is in the 2nd paragraph down. This is an UPDATE, to my initial review because Amazon was kind enough to send me another one.

Again, the packaging and shipping time were all good. Upon opening the blade box, I noticed an immediate improvement in quality. No bumps or wrinkles in the blade. The weld was clean and polished as it should be. There were no visible high /low or thick/thin areas in the blade. And the blade laid perfectly flat on my work bench. I then installed the blade on the saw and began the process of manually tracking the blade to the wheels. This blade tracked right to the center of the wheels, with hardly any adjustment needed. After gently tightening it up a few turns, I switched on the motor and the blade held the tracking perfectly dead center on both wheels. I was impressed. I gave it about 3 minutes to "break-in" with my saw, then ran a few test cuts. I must say I was very impressed. The cut was...Read more

I use this blade on a 3/4hp Ridgid 14in saw. I've used it 5-6 times now and it has managed to cut everything I've asked it to cut with no problems.