Customer Reviews
Average Customer Review
(15 customer reviews) 13 of 13 people found the following review helpful
Dimesions,
October 17, 2006 Sanford Imhoff (Illinois) - See all my reviews
This review is from: DELTA 50-941 Mobile Base (Tools & Home Improvement)
A well-built, solid mobile stand. Easy to assemble. The inside measurements are 19.5 x 22 not 18.25 x 22 as stated above, if that matters to you.
12 of 13 people found the following review helpful
Needs Work to Fit Delta 36-717,
February 28, 2006 Robert Potter (Portland, OR USA) - See all my reviews
This review is from: DELTA 50-941 Mobile Base (Tools & Home Improvement)
I bought this base for my 36-717 hybrid table saw because Amazon listed it as an accessory for that model. I could find no information on which base to use on the Delta web site. The base comes with a list of all Delta mobile bases, and this one does appear to be the closest fit.
The base is very well constructed, and very heavy duty. The foot lever works well for lifting the base up onto its rollers and locks in that position with confidence. However there was a 3/4" - 1" gap between the front and sides of the saw cabinet and the base sides. This allowed the saw to shift if the base were down on its stabilizer feet and you pushed the saw. I considered making a couple of wooden shims to fill the gaps, but instead I pulled the saw back out of the base and glued a piece of automotive inner tube to the flanges that support the saw in each corner of the base. Once I set the saw back in the base, I could push on it all I wanted and it wouldn't shift at all.
1 of 1 people found the following review helpful
Very nice for use with a band saw,
October 3, 2007 Jordan H. Shatsoff (Waltham, MA) - See all my reviews
Amazon Verified Purchase(What's this?)
This review is from: DELTA 50-941 Mobile Base (Tools & Home Improvement)
I used this with a Delta Bandsaw 28-206.
The good: Easy to use and only adds a little extra height to the work surface.
The bad: Nothing so far
The silly: The base leaves a gap, which seems silly since the listing specifically says it is for the 28-206. A couple of pieces of wood makes it a nice tight fit.
