SuperCut B105H12T3 Hawc Pro Resaw Bandsaw Blades, 105" Long - 1/2" Width; 3 Tooth; 0.045" Kerf

A high silicon content resaw blade with an aggresive set and modified gullet to increase speed, extend life, and improve the straightness of cut.  This blade improves on sawdust removal in a long or thick cut. Hawc Pro is the best all around blade for resawing up to 1/2" thick. It will last longer and cut straighter than conventional bandsaw blades due to its special design and induction hardened teeth. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) bandsaw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser Block Kits Installed. If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 - Upon requested, Magnate makes blades of any length and types to fit your brand and model.