SuperCut B57W14R14 Three Wheeler Bandsaw Blades, 57" Long - 1/4" Width; 14 Raker Tooth; 0.014" Kerf

This "The Three Wheeler" blade is made of a special Carbon Tool Steel with precision, heat-treated teeth that is thinner (.014") to enable it to withstand the sharp flexing and high speeds. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 57" band saw blades suit the following models: Central Machinery® D4473-OBMB; Black & Decker® 12"; Duracraft® BBS4I2; Shopcraft® T676020; NuWay® 12"; If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications.2 - If the owner's manual is not available, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.