SuperCut B70W14H6 Three Wheeler Bandsaw Blades, 70" Long - 1/4" Width; 6 Hook Tooth; 0.014" Kerf

The Three Wheeler blade is made of special Carbon Tool Steel with precision heat-treated teeth that is thinner (.014") in order to enable it to withstand sharp flexing and high speeds. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 70 inch ( 5 ft. 10 inch, 5' 10" ) bandsaw blades suit the following models: United? BS375; Jet? DBS-14; Valuecraft? 8170; Shopcraft? T7060; Buffalo? 3WBS-14; American Machine Co.? AMT; Enco? 199-9030. (Three Wheeler ); Record Power-Select? RSBS10, Clark-CBS355; Sealy? SM1214; If in doubt, to determine bandsaw blade length: 1 - Check the owner's manual of your bandsaw machine for specifications - not only the length, but also the range of the width and thickness.2 - If the owner's manual is not available, refer to previous invoices.3 - Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 - Upon requested, Magnate makes blades of any length and types to fit your brand and model.