Timber Wolf H8519 93-1/2" X 1/2" X .025" X 3 Pos Claw Blade

I have a General 90-125 model 14in bandsaw. These blades are the best money to upgrade that saw I have spent. We resaw at the top of the stock range of 6 in and get a cut that is within .02 in typically. This lets us book match maple, cocobolo and exotics with ease. At some point we'll toss in the riser block and switch to the 115.5" blades and get an additional 6" of resaw and 10% of band length.

Follow the instructions on tensioning and then add about a turn or two for resaw and you will be very happy.
Keep the gum and pitch of with a cleaning solution, and round the back with either a stone or 100 grit sand paper if you try to cut curves.

This is a low-tension blade, and I cannot get the tensioning right on this... This blade wanders all over the place - I have not had this issue with the high-tension blades I've used.